| Abu | Da ake bukata | Ƙimar gwaji | |
| Alumina yumbura | Abubuwan da ke cikin Al2O3 | 92% | 92.09% |
| Yawan yawa | > 3.60g/cm 3 | 3.62g/cm 3 | |
| Rockwell Hardness | > 85 HRA | 90 HRA | |
| Roba | Ƙarfin Ƙarfin Ƙarfi | >> 14Mpa | 14Mpa |
| Tsawaitawa a gazawa | 450% | 450% | |
| Taurin teku | 60+/- 5 Shore A | 60+/- 5 Shore A | |
| Matsakaicin nakasawa na dindindin | <= 24% | 30% | |
| Abradability | 0.0005g (P=74N,n=800rpm,t=30min,Quartz snad) | 0.0005g (P=74N,n=800rpm,t=30min,Quartz snad) | |
| Tsayar da damuwa | 12Mpa | 12Mpa | |
| Kaurin yumbu | 7mm ku | 7mm ku | |
| Kaurin roba | 5mm ku | 5mm ku | |
1: Idan abin nadi ya tsufa, kafin shigarwa, kuna buƙatar cire ƙin manne, don Allah a yi amfani da madaidaicin kusurwa da farantin karfe na tungsten don goge saman abin nadi, kauri don maganin goge goge shine 30um.
2. Goga abin wanka a kan goge goge na abin nadi, tsaftace datti da maiko.
3. Jira bushewar abin wanke-wanke, goge murfin karfe a saman abin nadi don guje wa lalata daga abubuwan waje.
4. Mix da sanyi curing m SK313, sa'an nan goga da m a kan abin nadi surface ,bayan warkewa, brush da wani karin Layer SK313 a kan abin nadi sake, a halin yanzu brushing Layer SK313 a kan blue goyon baya na roba yumbu liner.
5. Lokacin da mannen ya daɗe don ɗan yatsa, don Allah a liƙa layin yumbu na roba a saman abin nadi, sannan a yi amfani da guduma ta robar yana bugun haɗin da kyau, a ƙarshe sanya wakilin gyaran roba a wurin haɗin gwiwa na yumburan roba. don rufewa magani.
